BFM Weighing Bellows

Specifikationer

Wall Thickness (+/- 10%)

Base Sections: 0,9 mm
Formed Profile: 0,35 mm
Operating Temp. Range °C

-25 to 80
Max. Surge Temp. °C

100
Low Temp Flexibility

Good
Max. Operating Pressure

0,34 bar / 5,0 PSI
(for temp. to 95°C / 195°F)
Surface Resistivity (Ohms)

10(10)
Air Permeability

0
Available Sizes

Diameter: Ø100mm, Ø150mm
Length: 80mm
Compliance

Atex Compliant: IBExU tested. Can be used in all dust explosion hazardous areas (restrictions apply).
Complies with the following regulations:
FDA 21 CFR 177.1680 & 177.2600, USDA, (EC) 1935/2004, 2023–2006 & 10/2011.
Manufactured from 3A 20-27 certified Seeflex Material and the BFM® cuff and spigot system is a 3A certified 63-04 sanitary fitting.
NOTE: Spigots for the Weighing Bellows must be welded exactly 80mm (3 5/32”) apart to ensure optimum performance and accuracy.