BFM Fitting Rings

Alle BFM´er kan laves med en eller flere SS ringe.

SS ringe kan være med til at stabilisere installationen ved enter over- eller undertryk.

På længere BFM´er, anbefales det at have en eller flere ringe.

BFM Fitting Rings
BFM Fitting Rings - Bild 2
BFM Fitting Rings - Bild 3
BFM Fitting Rings - Bild 4
BFM Fitting Rings - Bild 5
BFM Fitting Rings - Bild 6
BFM Fitting Rings - Bild 7
BFM Fitting Rings - Bild 8
BFM Fitting Rings - Bild 9

Specifikationer

Material

Stainless Steel T304L or PE (Plastic)
Ring Thickness (Ø)

SS: 6.0mm
PE: 8.0mm
The connector that joins the PE ring together is approx. 10mm.
Min. Diameter

SS & PE: 100mm
Max. Diameter

SS: 500mm
PE: 1000mm
Min. Connector Length

150mm
Max. Connector Length

<= Ø500mm: 4500m
Ø550mm-1000mm: 500mm (Plastic only)
Max. number of rings:

Seeflex, LM3, LM4, Telex, Telex NP: 10
Ø150-500mm: 8
Ø100 & Ø125mm: 6
Distance between spigot & rings

150mm long: 75mm
All other lengths: 100mm
Multiple rings evenly sped at a minimum

CL < 850mm: 100mm apart (max 4)
CL >= 850mm: 200mm apart (max 10)
Connector materials that can be supplied with rings

Seeflex 040E (incl. Wash Sleeves & Blanking Socks/Bins), Seeflex 040AS, LM3, LM4, Reflex & Reflex NP (Seeflex 020E is on request only).