BFM Teflex NP Black

Teflex NP is pure PTFE.

Teflex NP can operate at high temperatures, continuously at 300°C and briefly at 316°C.

It can be used with products across the entire pH scale, meaning corrosive and acidic products do not affect Teflex NP.

Teflex NP is not recommended for use in oscillating applications.

  • EC1935/2004 and FDA approved

  • ATEX Zone 20 – 21 – 22 + 1 – 2

  • Wall thickness 0,23mm

  • Max pressure 0,72bar

Specifications

Fibre

Pure PTFE
Colour

Black
Construction/Finish

Multilayer film
Thickness (mm)

0,23
Max. Operating Temp. °C

300
Max. Surge Temp. °C

316
Surface Resistance (Ohms)

10(6)
Air Permeability

None
Available Sizes (in 50mm increments)

Diameter: (Also available in 125mm)
Ø100mm – 500mm
Length:
80mm, 100mm to 1000mm
Compliance

Atex Compliant: IBExU tested. Can be used in all dust & gas explosion hazardous areas (restrictions apply).
Complies with the following regulations:
FDA 21 CFR 177.1550, 175.105 & 178.3297, (EC) 1935/2004 & 10/2011