BFM Teflex

Teflex is made of 100% woven PTFE.

Teflex can operate at high temperatures, continuously at 260°C and briefly at 280°C.

Teflex can withstand the entire pH scale, meaning caustic or acidic exposure has no effect on Teflex.

It can handle vibrations, movements, and compression.

  • EC1935/2004 and FDA approved

  • ATEX Zone 20 – 21 – 22

  • Wall thickness 0,5mm

  • Temperature op to 280˚C

  • Diameter from Ø100mm to Ø1650mm

Specifications

Fibre

Teflon PTFE

Colour

Natural (dark brown)

Construction/Finish

Basket weave

Thickness (mm)

0,5

Max. Operating Temp. °C

260

Max. Surge Temp. °C

280

Low Temp. Flexibility

Good

Surface Resistance (Ohms)

Insulative

Air Permeability

cm3/cm2sec@125Pa: 0,3
ft3/ft2/min@0,5" wg: 0,5

Available Sizes

Diameter: (Also available in 125mm)
Ø100mm, 150mm to 1650mm
Length:
80mm, 100mm to 1500mm

Compliance

Atex Compliant: IBExU tested. Can be used in certain dust explosion hazardous areas (restrictions apply).
Complies with the following regulations:
FDA 21 CFR 177.1550, 178.3297, (EC) 1935/2004 & 10/2011.